परिव्यय लेखांकन Cost Accounting

थोडक्यात सारांश

Cost accounting records, classifies and analyses costs so that management can find the cost of each product, job or service, control waste and fix prices. This first topic explains the meaning and objectives of cost accounting, the elements of cost, cost unit and cost centre, and the different ways of classifying costs.

महत्त्वाचे मुद्दे

• Cost (परिव्यय) – the amount of expenditure actually incurred on, or attributable to, a given thing.
• Costing – the technique and process of finding costs. Cost accounting – applying costing principles to record and control costs.
• Objectives: find cost per unit, help in price fixing, control costs, reduce waste, give data for decisions (make or buy, shut down), and help in budgets.
• Elements of cost: Material, Labour and Expenses. Each is direct (traced to one product) or indirect (overheads).
• Indirect material + indirect labour + indirect expenses = overheads, grouped as factory, office/administration, and selling & distribution.
• Cost unit – the unit in which cost is measured (per tonne of steel, per kWh of power, per passenger-km, per bed-day in a hospital).
• Cost centre – a location, person or machine for which costs are collected (production or service cost centre).
• Profit centre – a segment responsible for both cost and revenue.
• Classification of cost: by nature/element, by function (production, administration, selling, distribution, R&D), by behaviour (fixed, variable, semi-variable), by controllability (controllable, uncontrollable), by normality (normal, abnormal), by time (historical, pre-determined/standard), and for decisions (sunk, opportunity, marginal, differential cost).
• Financial vs cost accounting: financial accounts show the overall result for outsiders and are compulsory; cost accounts show product-wise cost for management and are needed by law only for certain industries under the Companies (Cost Records and Audit) Rules, 2014.

महत्त्वाच्या संज्ञा

• Fixed cost – stays the same in total when output changes (rent, salaries); cost per unit falls as output rises.
• Variable cost – changes in total in direct proportion to output (raw material); per unit it stays the same.
• Semi-variable cost – partly fixed, partly variable (electricity, telephone).
• Sunk cost – a past cost that cannot be recovered and is ignored in decisions.
• Opportunity cost – the benefit given up by choosing one option over the next best one.

नमुने व सूत्रे

• Prime cost = direct material + direct labour + direct expenses.
• Total cost = prime cost + all overheads.
• High–low method: variable cost per unit = change in cost ÷ change in output; fixed cost = total cost − (variable cost per unit × output).

Worked problem: At 1,000 units the power cost is ₹25,000; at 1,500 units it is ₹32,500. Find fixed and variable parts.

५ महत्त्वाचे प्रश्न

Q1. Define cost unit and cost centre with examples.

Cost unit is the unit of product or service in which cost is expressed, e.g. per tonne for cement, per km for transport. Cost centre is a location, person or equipment for which costs are collected, e.g. machine shop, packing department.

Q2. Give four examples each of direct and indirect material.

Direct: wood in furniture, cloth in shirts, steel in a car body, leather in shoes. Indirect: lubricating oil, cotton waste, small nails and glue, cleaning material.

Q3. Explain the classification of costs.

Outline: by element (material, labour, expenses); by traceability (direct, indirect); by function; by behaviour with a short graph description; by controllability; by normality; by time; for decision-making. Give one example under each.

Q4. Distinguish between cost accounting and financial accounting.

Points: purpose (management vs outsiders), legal need, scope (product-wise vs whole firm), period (frequent vs yearly), stock valuation (cost vs lower of cost or net realisable value), use of estimates, control of costs, form of reports.

Q5. At 2,000 units total cost is ₹60,000 and at 3,000 units ₹80,000. Find fixed cost and the cost at 3,500 units.

Variable cost per unit = 20,000 ÷ 1,000 = ₹20. Fixed = 60,000 − (2,000 × 20) = ₹20,000. Cost at 3,500 units = 20,000 + (3,500 × 20) = ₹90,000.

परीक्षेसाठी टीप

For a "classification of cost" question, draw a neat chart first and then explain each head with an example. It fetches full marks quickly.

थोडक्यात सारांश

A cost sheet is a statement that shows the total cost and cost per unit of production for a period, step by step: prime cost, works cost, cost of production, cost of sales, and profit. It also helps in comparing costs and preparing quotations (tenders).

महत्त्वाचे मुद्दे

• A cost sheet (परिव्यय पत्रक) is prepared for output-based units (unit or output costing), usually monthly or yearly.
• Steps: materials consumed → prime cost → works/factory cost → cost of production → cost of goods sold → cost of sales → profit → sales.
• Materials consumed = opening stock of raw material + purchases + carriage inwards − closing stock of raw material.
• Opening and closing work-in-progress (WIP) are adjusted at works cost level.
• Opening and closing finished goods are adjusted after cost of production to get cost of goods sold.
• Items excluded from a cost sheet (pure financial items): interest on capital, income tax, dividends, loss on sale of assets, donations, goodwill written off, discount on shares, transfer to reserves, interest/dividend received.
• Scrap sold is deducted from works cost (or from materials, as the problem says).
• Showing cost per unit beside the total makes comparison easy.
• Tender/quotation: past cost sheet ratios (e.g. factory overhead as % of direct wages, office overhead as % of works cost) are used to estimate the price for a new order.

महत्त्वाच्या संज्ञा

• Prime cost – total of all direct costs.
• Works cost (factory cost) – prime cost plus factory overheads, adjusted for WIP.
• Cost of production – works cost plus office and administration overheads.
• Cost of sales – cost of goods sold plus selling and distribution overheads.

नमुने व सूत्रे

Worked problem: Data for 10,000 units (all sold): opening raw material ₹10,000, purchases ₹48,000, carriage inwards ₹2,000, closing raw material ₹10,000, direct wages ₹30,000, direct expenses ₹5,000, factory overheads ₹20,000, opening WIP ₹5,000, closing WIP ₹3,000, office overheads ₹10,000, selling and distribution ₹8,000, sales ₹1,50,000.

Profit as % of cost = 25,000 ÷ 1,25,000 × 100 = 20%. Profit as % of sales = 25,000 ÷ 1,50,000 × 100 = 16.67%.

५ महत्त्वाचे प्रश्न

Q1. What is a cost sheet? State its uses.

A statement showing the total and per-unit cost of output under different heads for a period. Uses: shows cost per unit, helps fix selling price, compare with past periods, control costs and prepare tenders.

Q2. Name four items that are not shown in a cost sheet.

Interest on capital, income tax paid, dividend paid, loss on sale of fixed assets (also donations and goodwill written off).

Q3. Prepare a statement of cost from given data (as above) and show profit.

Use the format above: materials consumed, prime cost, works cost with WIP, cost of production, finished goods adjustment, cost of sales, profit and sales, with per-unit column.

Q4. In the problem above, a tender for 2,000 units is to be quoted using the same per-unit cost and 20% profit on cost. Find the price.

Cost of sales per unit = ₹12.50. Total cost = 2,000 × 12.50 = ₹25,000. Profit 20% = ₹5,000. Tender price = ₹30,000 (₹15 per unit).

Q5. Explain the treatment of WIP, finished goods and scrap in a cost sheet.

Opening WIP is added and closing WIP deducted at works cost level. Opening finished goods are added and closing finished goods deducted after cost of production to get cost of goods sold. Sale value of normal scrap is deducted from works cost.

परीक्षेसाठी टीप

Always add a per-unit column and label each subtotal in bold words. Check that profit = sales − cost of sales before you finish.

थोडक्यात सारांश

Material is often the biggest part of product cost, so it must be bought, stored and issued carefully. Material control means having the right material, in the right quantity, at the right time and at the lowest cost, without waste. This topic covers purchase procedure, stock levels, EOQ, ABC analysis and the methods of pricing material issues (FIFO, LIFO, weighted average).

महत्त्वाचे मुद्दे

• Purchase procedure: purchase requisition → inquiry and quotations → purchase order → receipt and inspection (goods received note) → checking the invoice → payment.
• Store records: bin card (quantity only, kept by the storekeeper) and stores ledger (quantity and value, kept by the costing department).
• Material requisition note is used to issue material; material return note for unused material.
• Stock levels keep stock neither too high (blocked capital) nor too low (stoppage).
• EOQ (Economic Order Quantity) – the order size at which ordering cost + carrying cost is lowest.
• ABC analysis: A items – few items, high value (about 10% items, 70% value) – strict control; B items – moderate; C items – many items, low value – simple control.
• Perpetual inventory system – continuous record of receipts, issues and balance, with continuous stock verification.
• JIT (Just-in-Time) – material arrives exactly when needed, keeping stock near zero.
• Pricing of issues: FIFO (first in, first out), LIFO (last in, first out), simple average, weighted average, standard price. AS-2 does not allow LIFO for financial statements, but it is still taught in costing.
• Normal loss of material is absorbed in the cost of good units; abnormal loss goes to Costing P&L.

महत्त्वाच्या संज्ञा

• Lead time (reorder period) – time between placing an order and receiving the material.
• Reorder level (पुनर्मागणी पातळी) – stock level at which a fresh order is placed.
• Ordering cost – cost of placing and receiving one order.
• Carrying cost – cost of holding one unit in stock for a year (interest, storage, insurance).

नमुने व सूत्रे

• EOQ = √(2AO ÷ C), where A = annual requirement (units), O = ordering cost per order, C = carrying cost per unit per year.
• Reorder level = maximum usage × maximum reorder period.
• Minimum level = reorder level − (normal usage × normal reorder period).
• Maximum level = reorder level + reorder quantity − (minimum usage × minimum reorder period).
• Average stock level = minimum level + ½ reorder quantity.

Worked problem 1 (EOQ): A = 12,000 units, O = ₹150, C = ₹10. EOQ = √(2 × 12,000 × 150 ÷ 10) = √3,60,000 = 600 units. Orders per year = 12,000 ÷ 600 = 20.

Worked problem 2 (levels): normal usage 100 units/week, minimum 50, maximum 150; reorder period 4–6 weeks (normal 5); reorder quantity 600.

Worked problem 3 (pricing): Opening 200 units @ ₹10; 5 Jan purchased 300 units @ ₹12; 10 Jan issued 400 units.

Check: in each method issue + closing = ₹5,600.

५ महत्त्वाचे प्रश्न

Q1. What is EOQ?

EOQ is the quantity to order each time so that the total of ordering and carrying costs is the lowest. EOQ = √(2AO ÷ C).

Q2. Distinguish between bin card and stores ledger.

Bin card is kept by the storekeeper inside the store and shows quantity only; entries are made before the transaction. Stores ledger is kept in the costing office and shows quantity, rate and value; entries are made after the transaction.

Q3. Explain the various stock levels with formulas.

Outline: reorder, minimum, maximum, average and danger level; formula and purpose of each; factors affecting levels (lead time, usage, EOQ, storage space, capital, price trends).

Q4. Explain FIFO and weighted average methods with merits and demerits.

FIFO: issues at oldest prices; closing stock at latest prices; simple; in rising prices cost is understated. Weighted average: new average after each purchase; smooths price changes; needs more calculation. Illustrate with the table above.

Q5. Explain ABC analysis and perpetual inventory system.

ABC: grouping by value, control effort in proportion to value, merits. Perpetual inventory: bin cards, stores ledger, continuous verification, early detection of loss and theft, accurate interim accounts.

परीक्षेसाठी टीप

In stores ledger problems, always show a "balance" column after every receipt and issue. A final check that issues + closing stock = opening + purchases catches mistakes.

थोडक्यात सारांश

Labour cost is the wages and other benefits paid to workers. To control it, a firm records time correctly, pays wages by a suitable method, studies labour turnover and uses incentive plans that reward faster work. This topic covers time-keeping, time and piece wage systems, premium bonus plans (Halsey, Rowan), Taylor and Merrick plans, idle time, overtime and labour turnover.

महत्त्वाचे मुद्दे

• Direct labour works on the product (machine operator); indirect labour supports production (supervisor, cleaner).
• Time-keeping records attendance (gate entry, attendance register, biometric/card systems); time-booking records time spent on each job (job card).
• Time rate: wages = hours worked × rate per hour. Piece rate: wages = units produced × rate per unit.
• Halsey premium plan: time wages + 50% of time saved × rate (bonus share may be 33⅓% in Halsey-Weir).
• Rowan plan: time wages + (time saved ÷ time allowed) × time taken × rate. Bonus can never exceed time wages.
• Taylor's differential piece rate: low rate (83% of normal piece rate) if efficiency is below standard; high rate (125%) if at or above standard.
• Merrick's multiple piece rate: normal piece rate up to 83% efficiency; 110% of piece rate for 83–100%; 120% above 100%.
• Idle time: paid time with no work. Normal idle time (tea breaks, tool change) is added to labour cost; abnormal idle time (strike, power failure, machine breakdown) goes to Costing P&L.
• Overtime premium: if caused by general pressure of work, treat as overhead; if at the customer's request, charge to that job; if abnormal, to Costing P&L.
• Labour turnover (कामगार उलाढाल) – rate at which workers leave and are replaced. High turnover raises training and recruitment costs.

महत्त्वाच्या संज्ञा

• Time allowed (standard time) – time fixed for a job by time study.
• Time saved – time allowed minus time taken.
• Separation – worker leaving the firm. Replacement – new worker in place of one who left.
• Flux method – turnover based on both separations and replacements.

नमुने व सूत्रे

• Halsey: Earnings = (T × R) + 50% × (S − T) × R
• Rowan: Earnings = (T × R) + [(S − T) ÷ S] × T × R
• (S = standard time, T = time taken, R = rate per hour)
• Separation rate = separations ÷ average number of workers × 100
• Replacement rate = replacements ÷ average workers × 100
• Flux rate = (separations + replacements) ÷ average workers × 100

Worked problem 1: S = 10 hours, T = 8 hours, R = ₹50 per hour.

Worked problem 2: Workers at the start of the year 380, at the end 420. Separations 20, replacements 16.

५ महत्त्वाचे प्रश्न

Q1. What is idle time? How is it treated in cost accounts?

Idle time is paid time when the worker does no productive work. Normal idle time is part of labour cost (or factory overhead); abnormal idle time is charged to Costing Profit and Loss account.

Q2. State two merits each of time rate and piece rate.

Time rate: simple to calculate; quality is not hurt by hurry. Piece rate: rewards efficient workers; less supervision needed and cost per unit is known.

Q3. Standard time 40 hours, time taken 30 hours, rate ₹40. Calculate earnings under Halsey and Rowan.

Time wages = 30 × 40 = ₹1,200. Halsey bonus = 50% × 10 × 40 = ₹200, earnings ₹1,400. Rowan bonus = (10 ÷ 40) × 30 × 40 = ₹300, earnings ₹1,500.

Q4. Explain Taylor's differential piece-rate system.

Outline: standard output fixed by time and motion study; two piece rates – 83% of normal rate below standard, 125% at or above standard; merits (motivates efficient workers, simple); demerits (harsh on slow and new workers, can hurt quality). Small example: normal rate ₹2 per unit, standard 100 units.

Q5. What is labour turnover? Explain its causes, effects and remedies.

Outline: meaning and three methods of measurement; causes – avoidable (low pay, poor conditions, bad relations) and unavoidable (retirement, death, marriage); costs – preventive and replacement costs; remedies – fair wages, job security, welfare, grievance procedure, exit interviews.

परीक्षेसाठी टीप

In Halsey–Rowan sums, write S, T and R first, then the formula, then the figures. Rowan gives more bonus than Halsey when time saved is less than 50%; both are equal when exactly 50% is saved.

थोडक्यात सारांश

Overheads are all indirect costs – indirect material, indirect labour and indirect expenses. They cannot be traced to one product, so they are first collected by cost centres and then charged to products using a suitable rate. This topic covers classification of overheads, allocation and apportionment (primary distribution), re-apportionment of service departments (secondary distribution), absorption rates such as the machine hour rate, and under- or over-absorption.

महत्त्वाचे मुद्दे

• Overheads (उपरिव्यय) = indirect material + indirect labour + indirect expenses.
• Classified by function into factory (production), administration, selling and distribution overheads; by behaviour into fixed, variable and semi-variable.
• Allocation – charging a whole item to one cost centre (e.g. wages of a machine shop foreman to the machine shop).
• Apportionment – sharing a common item among cost centres on a fair basis.
• Common bases: rent and rates – floor area; power – horse power × machine hours; lighting – number of light points; supervision and canteen – number of workers; depreciation and insurance of machinery – value of machinery; insurance of stock – value of stock.
• Primary distribution – allocation and apportionment of all overheads to production and service departments.
• Secondary distribution – re-apportioning service department costs to production departments: direct redistribution, step method, repeated distribution or simultaneous equation method.
• Absorption – charging overheads to units of output using a rate: percentage of direct material, direct labour or prime cost; direct labour hour rate; machine hour rate; rate per unit.
• Under-absorption – overheads absorbed are less than actual; over-absorption – absorbed are more than actual.
• Treatment of under/over-absorption: write off to Costing P&L (if small or abnormal), use a supplementary rate, or carry forward (seasonal businesses).

महत्त्वाच्या संज्ञा

• Service department – helps production departments (stores, maintenance, power house).
• Machine hour rate – overhead cost of running a machine for one hour.
• Pre-determined rate – rate fixed in advance using budgeted overheads and budgeted base.
• Supplementary rate – rate used to correct the cost of jobs for under- or over-absorption.

नमुने व सूत्रे

• Pre-determined overhead rate = budgeted overheads ÷ budgeted base (hours, units).
• Machine hour rate = total overheads of the machine for a period ÷ machine hours in that period.
• Under(−)/over(+) absorption = overheads absorbed − actual overheads.

Worked problem: Production departments P1, P2 and service department S. Rent ₹12,000 (area 2:3:1), power ₹9,000 (H.P. 5:3:1), supervision ₹6,000 (workers 3:2:1). Allocated overheads: P1 ₹2,000, P2 ₹3,000, S ₹1,000. S is shared P1 60%, P2 40%.

If P1 works 3,400 machine hours, machine hour rate = 17,000 ÷ 3,400 = ₹5 per hour. If P2 works 4,000 labour hours, labour hour rate = 16,000 ÷ 4,000 = ₹4 per hour.

५ महत्त्वाचे प्रश्न

Q1. Distinguish between allocation and apportionment.

Allocation charges a whole overhead to one cost centre that alone caused it. Apportionment shares a common overhead among several cost centres on a suitable basis such as floor area.

Q2. What is under-absorption of overheads?

When overheads charged to production using the pre-determined rate are less than the actual overheads. Example: actual ₹52,000, absorbed 10,000 hours × ₹5 = ₹50,000 → under-absorbed ₹2,000.

Q3. Explain the bases of apportionment of overheads.

Outline a table of common items and their bases (rent – area, power – H.P./hours, lighting – points, canteen – workers, depreciation – value, stores – requisitions); principles: benefit, survey, efficiency, ability to pay.

Q4. Explain the methods of secondary distribution.

Outline direct redistribution, step (non-reciprocal) method, and reciprocal methods – repeated distribution and simultaneous equations – with a short example of each.

Q5. Explain the methods of absorption of overheads. Which method is best?

Outline percentage of material, labour, prime cost; labour hour rate; machine hour rate; unit rate; merits and demerits. Machine hour rate is best for machine-intensive departments; labour hour rate where work is mostly manual.

परीक्षेसाठी टीप

In primary distribution tables, write the basis in brackets next to each item and total each column. Cross-check that the total column equals the sum of the department columns.

थोडक्यात सारांश

Job costing is used where work is done to the customer's order and each order (job) is different, such as printing, furniture making or repair work. Contract costing is a form of job costing used for large, long jobs like buildings, roads and bridges, which usually run beyond one year. This topic covers the job cost sheet, the contract account, work certified and uncertified, retention money, and how much profit on an incomplete contract may be taken to Profit and Loss.

महत्त्वाचे मुद्दे

• Job costing (काम परिव्यय पद्धती) – costs are collected for each job separately using a job number and a job cost sheet.
• Steps: production order → recording material (requisitions), labour (job cards) and overheads (absorption rate) against the job → job completed → cost compared with price.
• Contract costing – each contract is a cost unit; a separate Contract Account is kept, and most costs are direct (even site expenses and plant depreciation).
• Plant used on site: either charge depreciation only, or debit the full cost and credit the written-down value at the end.
• Work certified – value of work approved by the architect/engineer; work uncertified – work done but not yet certified, valued at cost.
• Retention money – part of the certified amount kept back by the contractee (e.g. 20%) as security for defects.
• Notional profit = (work certified + work uncertified) − cost of work to date.
• Work certified below 25% of contract price – no profit is taken.
• 25% to below 50% – ⅓ × notional profit × cash received ÷ work certified.
• 50% or more – ⅔ × notional profit × cash received ÷ work certified.
• Nearly complete – estimated total profit × work certified ÷ contract price (or the cash-based variant).
• Profit on incomplete contracts (traditional rule taught in cost accounting):
• The rest of the notional profit is kept as a reserve. Any loss is fully written off at once.
• Financial accounts under AS-7 / Ind AS 115 recognise revenue by the percentage of completion or stage of completion; the fraction rules above are the cost-accounting convention.
• Escalation clause – allows the price to rise if material or labour costs rise. Cost-plus contract – price = cost + agreed % of profit.

महत्त्वाच्या संज्ञा

• Contractee – the customer who gives the contract.
• Sub-contract – part of the work given to another contractor; its cost is a direct cost.
• Extra work – work beyond the original contract; charged and paid extra.
• Work-in-progress – certified plus uncertified work, less the profit reserve.

नमुने व सूत्रे

Worked problem: Contract price ₹10,00,000. Materials sent ₹3,00,000; wages ₹2,00,000; plant sent ₹1,00,000 (depreciation 10%); overheads ₹30,000. Materials at site at year end ₹20,000. Work certified ₹6,00,000; work uncertified ₹40,000. Cash received = 75% of work certified.

Work certified = 6,00,000 ÷ 10,00,000 = 60% (more than 50%). Cash received = 75% × 6,00,000 = ₹4,50,000.
Profit to P&L = ⅔ × 1,20,000 × 4,50,000 ÷ 6,00,000 = 80,000 × 0.75 = ₹60,000. Reserve = 1,20,000 − 60,000 = ₹60,000.

५ महत्त्वाचे प्रश्न

Q1. What is retention money?

It is the part of the value of work certified that the contractee does not pay at once (e.g. 20%) and keeps as security against faulty work. It is paid after the contract is satisfactorily completed.

Q2. Distinguish between work certified and work uncertified.

Work certified is approved by the contractee's architect and valued at contract price. Work uncertified is done but not yet approved; it is valued at cost.

Q3. Explain the features of job costing and the job cost sheet.

Outline: industries using it; each job different and identifiable; job number; job cost sheet heads (materials, labour, overheads, total cost, price, profit); merits and limitations.

Q4. In the problem above, if work certified were only 40% (₹4,00,000) with notional profit ₹60,000 and cash 80% of certified, find the profit to be taken.

Work certified is 40% (between 25% and 50%). Cash received = ₹3,20,000. Profit = ⅓ × 60,000 × 3,20,000 ÷ 4,00,000 = 20,000 × 0.8 = ₹16,000.

Q5. Explain the main features of contract costing.

Outline: large jobs at site; contract as cost unit; mostly direct costs; plant treatment; progress payments and work certification; retention money; escalation and cost-plus clauses; profit on incomplete contracts; sub-contracts; WIP in the Balance Sheet.

परीक्षेसाठी टीप

Find the "% of completion" first and write which rule (⅓ or ⅔) applies before calculating; examiners look for this statement.

थोडक्यात सारांश

Process costing is used in industries where production passes through a series of continuous processes and all units are alike – sugar, paper, cement, chemicals, textiles, oil refining. The output of one process becomes the input of the next. This topic covers process accounts, normal loss, abnormal loss and abnormal gain, and the idea of equivalent production.

महत्त्वाचे मुद्दे

• Process costing (प्रक्रिया परिव्यय) – a method of costing where costs are collected for each process and the cost per unit is found by dividing by the output of that process.
• Features: continuous production, standard products, output of one process is the raw material of the next, losses at each stage, by-products and joint products are common.
• A Process Account is debited with materials, labour, direct expenses and overheads, and credited with normal loss (scrap value), abnormal loss and the output transferred to the next process.
• Normal loss – unavoidable loss expected under normal conditions (evaporation, chemical change). Its cost is borne by good units; only its scrap value is credited.
• Abnormal loss – loss above normal loss, due to carelessness, accidents or bad material. It is valued like good units and transferred to Abnormal Loss A/c, then to Costing P&L after crediting its scrap value.
• Abnormal gain – when actual loss is less than normal loss. It is valued like good units and debited in the process account; the scrap value given up is adjusted in Abnormal Gain A/c.
• Equivalent production – incomplete units (WIP) converted into an equal number of complete units, e.g. 100 units 50% complete = 50 equivalent units.
• Inter-process profit – when output is transferred at a price above cost (taught as an extension).
• By-products – low-value products produced along with the main product; joint products – two or more products of similar importance from the same input.

महत्त्वाच्या संज्ञा

• Scrap – residue with small sale value.
• Spoilage – goods damaged beyond repair.
• Equivalent units – units completed + completed portion of WIP.
• Process costing vs job costing – continuous and uniform vs specific and different.

नमुने व सूत्रे

• Cost per unit = (total cost − scrap value of normal loss) ÷ (input units − normal loss units).
• Abnormal loss units = normal output − actual output; abnormal gain units = actual output − normal output.

Worked problem: Process A: input 1,000 units at ₹20 = ₹20,000; labour ₹5,000; overheads ₹2,500. Normal loss 10% of input, sold as scrap at ₹5 per unit. Actual output 850 units.

Cost per unit = (27,500 − 500) ÷ (1,000 − 100) = 27,000 ÷ 900 = ₹30. Abnormal loss = 900 − 850 = 50 units.

Abnormal Loss A/c: debit ₹1,500; credit scrap sale 50 × ₹5 = ₹250 and Costing P&L ₹1,250.
If output had been 920 units: abnormal gain = 920 − 900 = 20 units × ₹30 = ₹600, debited in the process account.

५ महत्त्वाचे प्रश्न

Q1. What is normal loss? How is it treated?

Normal loss is the unavoidable loss expected in a process. Its cost is absorbed by the good units; the process account is credited only with its scrap value (if any).

Q2. Distinguish between abnormal loss and abnormal gain.

Abnormal loss is actual loss more than normal loss; it is credited to the process account at the cost of good units and its net cost goes to Costing P&L. Abnormal gain is actual loss less than normal; it is debited to the process account and the net gain goes to Costing P&L.

Q3. Explain the features of process costing and the industries where it is used.

Outline the features listed above; industries – sugar, cement, chemicals, paper, textile, soap, oil refining, food processing; merits and limitations.

Q4. Input 2,000 units @ ₹10, other costs ₹8,000, normal loss 5% (scrap ₹4), output 1,880 units. Find cost per unit and abnormal loss.

Total cost = 20,000 + 8,000 = ₹28,000. Normal loss = 100 units, scrap ₹400. Cost per unit = (28,000 − 400) ÷ 1,900 = 27,600 ÷ 1,900 = ₹14.53 (rounded). Abnormal loss = 1,900 − 1,880 = 20 units × 14.53 ≈ ₹291.

Q5. Distinguish between job costing and process costing.

Points: nature of production (orders vs continuous), cost unit (job vs process output), cost collection (job cost sheet vs process account), WIP (usually none vs common at each stage), control, transfers, uniformity of products, examples.

परीक्षेसाठी टीप

In every process problem, draw the units column on both sides and make the unit totals agree before you work out the money columns.

थोडक्यात सारांश

When a firm keeps cost accounts and financial accounts separately (non-integrated system), the profit shown by the two sets of books is usually different. A reconciliation statement explains the reasons for the difference and proves that both sets of accounts are arithmetically correct. This topic covers the need for reconciliation, the causes of difference and the method of preparing the statement.

महत्त्वाचे मुद्दे

• Reconciliation (समन्वय) – bringing the costing profit and the financial profit into agreement by listing every item that causes a difference.
• Need: to check the accuracy of both sets of accounts, find reasons for differences, improve cost control and give management confidence in cost data.
• Items shown only in financial accounts – purely financial charges (interest on loans, loss on sale of assets, discount on issue of shares, preliminary expenses written off, fines, donations, income tax) and purely financial incomes (interest and dividend received, rent received, profit on sale of assets, transfer fees).
• Items shown only in cost accounts – notional charges such as interest on own capital and notional rent of own premises.
• Under- or over-absorption of overheads – cost accounts use pre-determined rates; financial accounts use actual amounts.
• Different stock valuation – opening and closing stock valued differently in the two books.
• Different depreciation methods or rates.
• Abnormal losses and gains – sometimes kept out of cost accounts.
• Causes of difference:
• Rules (starting from costing profit): add items that increase financial profit; deduct items that reduce financial profit.
• Over-absorbed overhead in cost books → financial profit is higher → add. Under-absorbed → deduct.
• Closing stock valued higher in cost books → costing profit is higher → deduct. Opening stock valued higher in cost books → add.
• Instead of a statement, a Memorandum Reconciliation Account may be prepared.
• Under an integrated accounting system, one set of books is kept, so no reconciliation is needed.

महत्त्वाच्या संज्ञा

• Costing profit – profit shown by the Costing Profit and Loss Account.
• Financial profit – profit shown by the financial Profit and Loss Account.
• Notional cost – a cost not actually paid but charged in cost accounts to show the true cost (e.g. rent of own building).
• Integrated accounts – one system serving both cost and financial needs.

नमुने व सूत्रे

Worked problem: Costing profit ₹1,00,000. Factory overheads under-absorbed in cost accounts ₹6,000; office overheads over-absorbed ₹4,000; interest received ₹3,000 (not in cost books); preliminary expenses written off ₹5,000 and donation ₹2,000 (financial books only); closing stock: cost books ₹50,000, financial books ₹45,000; depreciation: cost books ₹12,000, financial books ₹10,000.

५ महत्त्वाचे प्रश्न

Q1. Why is reconciliation of cost and financial accounts necessary?

Because the two profits differ under a non-integrated system. Reconciliation checks the arithmetical accuracy of both books, explains the reasons for difference and makes cost data reliable for management.

Q2. Give two items that appear only in financial accounts.

Income tax paid and interest received on investments (also loss on sale of fixed assets, donations, preliminary expenses written off).

Q3. Explain the reasons for the difference between costing profit and financial profit.

Outline the six causes listed above with one example each and the effect (add or less) when starting from costing profit.

Q4. Starting with financial profit ₹80,000, adjust: interest on own capital charged in cost books ₹6,000; dividend received ₹4,000; opening stock under-valued in cost books by ₹3,000. Find costing profit.

Notional interest reduces costing profit → less 6,000. Dividend received is only in financial books → less 4,000. Opening stock lower in cost books makes costing profit higher → add 3,000. Costing profit = 80,000 − 6,000 − 4,000 + 3,000 = ₹73,000.

Q5. Prepare a reconciliation statement from given data and explain the method.

Steps: choose the starting profit; list each difference; decide its effect on the other profit; place under add or less; total; arrive at the other profit. Use the worked table above; alternatively prepare a Memorandum Reconciliation Account.

परीक्षेसाठी टीप

For each item, ask: "Does this make the profit I am going towards higher or lower?" Write that reasoning in one word beside the item while practising; it removes sign errors.